Samsung J2 Flashing and Hard Reset

Samsung J2

SAMSUNG J2 HARD RESET

a) Switch of your device

b) Press the key combination Volume up + Home button + Power Button for a few seconds.

c) Release the keys as soon as the Samsung logo appears on screen.

d) Now select Wipe data/factory reset option from the recovery  menu.

e) Now you have to chose yes- delete all user data to reset the phone.

f) Now select Reboot System Now and then your device will restart and you are done.

Note : All your phones data will be deleted.

HOW TO FLASH SAMSUNG J2 ?

Requriements :

1. Smart phone should be charged at least 50%

2. Data Cable of good quality.

3.  USB Driver.

4. Stock Rom Compatible with your smartphone.

5. Odin Software 3.10.7 or later

PROCESS : 

Make sure every thing is ready as described in requirement list.

1) Turn off your device.

2) Now press and hold Volume Down + Power + Home key

3) Leave the Power button as soon as the phone vibrates but keep pressing Volume Down + Home  

4) Now you will enter the download mode in case it shows a warning sign press the volume up key.

5) Extract Odin Software and install in you system.

6) Now open the Odin exe file.

7) Now connect the phone to your pc using data cable. Odin will detect your phone and will show added at the lower left panel

8) Extract the Stock Rom file in your pc.

9) Add the firmware in Odin by clicking on AP button.

10) Click on the start button to begin the flashing process.

11) Now a Green Pass Message will appear after which your phone will restart.

12) Disconnect you phone from your PC.

13) Now your phone will stuck in the boot loop mode.

14) Now follow the hard reset process mentioned above in the page after which your smart phone will be ready.

LINKS :

Odin : Odin link

Firmware : firmware link

Video tutorial link for flashing : video tutorial